Mirka Microstar – Film-backed Mirco-Finishing Abrasive FM-622
Microstar’s secret is a special stearate layer and a smooth thin but flexible film backing.  Thanks to the special stearate, Microstar doesn’t clog as easily as traditional products. To top it off (pardon the pun) Microstar produces a fine scratch pattern that is ready to easily to polish to perfection. On many applications, Microstar works best in conjunction with a 5 mm interface pad. Microstar can be used wet but is primarily intended for dry sanding.
Dry sanding with Microstar produces a powdery finish and typically Microstar’s job is done. After dry sanding with Microstar until the desired profile or finish is achieved, clean with a microfiber cloth, and you are ready to switch to wet finishing. Wet sanding with Mirka Abralon is the perfect compliment because Abralon’s knitted backing will not alter the profile that you achieved with the Microstar process. Only very fine compounding will be necessary to finish the process, such as Polarshine 10.
Reviews
There are no reviews yet.